Pyrolon Plus 2

Lakeland’s lowest level of secondary flame-resistant protection, Pyrolon® Plus 2 comes with essential features to help maintain the integrity of your primary FR workwear.

Pyrolon Plus 2 garments are breathable, repel water, grease, oil, and other potentially flammable hazards, while passing the Secondary FR Garment standard ANSI/ISEA 203. Pyrolon Plus 2 is third-party certified thru UL.

These coveralls can be used in work environments where hazardous or non-hazardous substances are present and could contaminate your primary FR clothing.

Products

Filter by Garment Type
Filter by Garment Type
More
Filter by Seam Type
Filter by Seam Type
More
(fr)(Europe)CE Buyers Guide (fr)
CE Buyers Guide
French
(de)(Europe)CE Buyers Guide (de)
CE Buyers Guide
German
(en)(Europe)CE Buyers Guide (en)
CE Buyers Guide
English
(es)(Europe)CE Buyers Guide (es)
CE Buyers Guide
Spanish
(zh)(China)Products Catalog (China)
Products Catalog
Chinese
(en)(Canada)Disposable and Chemical Protective Clothing
Disposable and Chemical Protective Clothing
English
(en)(North America)Protective Clothing Buyers Guide for Oil and Gas Industries
Protective Clothing Buyers Guide for Oil and Gas Industries
English
(en)(North America)Disposable and Chemical Protective Clothing
Disposable and Chemical Protective Clothing
English
Please Note:
All test results quoted are from testing carried out at independent laboratories to the relevant {ASTM/CE} Standard(s). Unless stated otherwise tests are carried out on samples of the relevant protective material as opposed to finished garments. Note that all testing is conducted at specific temperatures according to ASTM or EN standard requirements. As permeation is affected by temperature it is important to consider the likely temperature in any application. Permeation test results record a time to a specific permeation rate as defined by the relevant standard and NOT a time to initial breakthrough of the chemical. Also note that differences may be apparent in some cases between CE and ASTM test results. Whilst the tests are similar, the CE standard records a time to a permeation rate of 1.0µg / min / cm2, whilst ASTM records a time to a permeation rate of 0.10µg / min / cm2. This may explain differences between results. As with all Personal Protective Equipment, selection should be based upon the end users risk assessment, it is the responsibility of the end user to determine the suitability of any PPE as part of this risk assessment and to comply with any/all legislative/governmental requirements. Contact Lakeland for more information.
Contact Us
Fill out the form below, and we will be in touch shortly.